- 1 How do you adjust the draw weight on a PSE compound bow?
- 2 How do you adjust the draw weight on a PSE Stinger?
- 3 How hard is it to draw a 70 lb bow?
- 4 How much draw weight does it take to kill a deer?
- 5 What year did the PSE Stinger come out?
- 6 How old is my PSE bow?
- 7 Can you change draw length compound bow?
- 8 How do I measure my draw length?
How do you adjust the draw weight on a PSE compound bow?
Draw Weight: Your bow is factory-set to within 2 lbs. of the peak draw weight indicated on the bow hang tag and the last 2 digits of the serial number. Changes in draw weight can be made by turning the limb bolt in or out. Before making any changes in weight, turn the limb bolt clockwise to the bottom position.
How do you adjust the draw weight on a PSE Stinger?
Best thing to do is turn each limb bolt a half turn each and then shoot a few arrows, doing it like that will give you your upper limit of draw weight you can pull and shoot accurately. If you drop down five pounds in draw weight you will have to resight.
How hard is it to draw a 70 lb bow?
70 lbs draw weight is actually quite difficult to draw. It is always better to underestimate than overestimate your required poundage. Even though it is likely you will move up in bow poundage over time, start light and move up. You may even want to consider purchasing a variety of limbs for the same bow.
How much draw weight does it take to kill a deer?
Note that you can effectively kill deer with a 40-pound draw – weight bow. As a rule of thumb, 40 pounds of kinetic energy efficiently kills whitetails, and 50 pounds or greater is required for larger game such as elk, moose or bear.
What year did the PSE Stinger come out?
Product description. The 2012 Stinger 3G Ready to Shoot Right hand 60 Lb Bow is a very quick and accurate workhorse of a bow. We took our extremely popular Stinger and completely redesigned it from the ground up.
How old is my PSE bow?
Locate the data sticker on the PSE bow. The data sticker is located on the inside of the lower limb of the bow, near the handle. The data sticker identifies the bow and allows the manufacturer to access information regarding the bow such as its year, make and model. Dial PSE’s customer support line at 520-884-9065.
Can you change draw length compound bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How do I measure my draw length?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.